Sumitomo Beier Variator Series User Manual

18
Table 14 Maintenance Manual Pages that can be Referenced Regarding Lubrication Maintenance
In the case where the ambient temperature is high, there is intense change in temperature, or the air contains corrosive gas
consult the oil producter. These situations may accelerate the deterioration of the oil.
Lubrication method
Supply of oil/grease
before initial operation
after purchase
Pages where maintenance method is shown
Oil/grease change
period
Recommended
oil/grease
Qty of oil/grease
Disposal of
oil/grease
Necessary
Self-lubricationOil bath
Oil
Beier
Forced lubrication
Trochoid pump
lubrication
8–3) (1)
P18
8–3) (2)
P19
8–3) (3)
P19
8–3) (4) (5)
P20
UnnecessarySelf-lubrication
Self-lubrication
Long-life
―――
GreaseGrease
Variator Bearing
Except for
Long-life
8–5) (1)
P23
8–5) (1)
P23
8–5) (3)
P23
8–5) (4)
P24
Unnecessary
Self-lubrication
―――
Grease
Motor Bearing
Unnecessary
8–6) (1)
P25
8–6) (2)
P25
8–6) (3)
P25
8–7) (1)
P26
8–7) (2)
P27
8–7) (1)
P26
8–6) (4)
P25
8–7) (3)
P27
Necessary
Self-lubrication
Oil bath
Oil
Cyclo
Plunger pump
lubrication
Forced lubrication
Trochoid pump
lubrication
8–4) (1)
P21
8–4) (2)
P21
8–4) (3)
P21
8–3) (4) (5)
P21
8-3) Oil Supply and Change for Beier
(1) Standard for lubricating oil change frequency
Task
Supply of oil
Oil change
Conditions of use
common
common
Indoor temperature is 0–35C°
Location where temperature cannot be kept
at 0–35C°
Conditions interval
At purchase
500 hrs operation or 6 months, whichever comes first.
5000 hrs operation or 1 year, whichever comes first.
2500 hrs operation or 6 months, whichever comes first.
First change
Second change and
thereafter
Table 15 A Type and B Type BEIER Part
Oil
supply
Time for lubricating oil
change
Remarks
——————At the time of purchase
Every 20,000 hours or
every 3 to 5 years
Increased frequency of
supply for use under
severe operating
conditions
Oil
change
Table 16 D Type (ND Series) BEIER Part
Table 13 Standard input speed
A Type BType D Type (ND Series)
Beier size
N02A–15A 1450/1750
980/1165
720/870
20A–40A
50A–200A
N02B–10B 1450/1750
980/1165
720/870
15B–30B
50B–150B
N05D–N10D 1450/1750
Standard input speed
(r/min)
Beier size
Standard input speed
(r/min)
Beier size
Standard input speed
(r/min)
COMMON

Sumitomo Beier Variator Series Specifications

General

Brand	Sumitomo
Model	Beier Variator Series
Category	Engine
Language	English