14 | P a g e
To identify your machine, find your serial plate and cross-reference the details with
the Technical Data that follows.
Note: It is important when talking to a Sumo representative that you provide the year
of manufacture in order to ensure clarity of the machine being discussed, as different
years may have slight or major design variations.
2.4 Technical Data
The following collection of tables denote the different machines available in each
range of Sumo products, and include the basic collection of technical data applicable
to those machines. For a more detailed technical data, see the correlating Machine
Manual & Parts Book.
Note: All dimensions hereafter are approximate and in metric. Length, width and
height dimensions refer specifically to the machine whilst in its required transport
positions, see Machine Manual & Part Books. All weights are based on standard
machines without any additions, modifications or loads. All machines are subject to
fabrication and assembly tolerances and could vary slightly from values given. Lengths
and Height have been omitted from all Mounted machines as the value is entirely
dependent on the connected tractor.
Machine Type Key:
Mounted = Machine mounted directly to a Tractor.
Rigid = Trailed Machine that does not fold.
Folding = Trailed/Mounted Machine that hydraulically folds.
To Next Page
Loading...
