Sumo DTS - 8 Troubleshooting; Mechanical Assemblies; Hydraulics; Electrical Faults

47 | P a g e
8. Troubleshooting
For all the follow points, proper PPE and care must be taken. Read and follow the
instructions given within this manual exactly.
8.1 Mechanical Assemblies
Problem
Solution
Ceasing Parts
Inspect for rust/wear, grease daily or as guided by this manual,
replace parts if necessary
8.2 Hydraulics
Problem
Solution
Leaking Cylinders
If under Warranty period, contact dealer. If not, tighten, if
possible – Do NOT over tighten or you risk damage. Clean up
excess/spilt oil – Do NOT expose skin to any fluids.
Leaking Hose Joints
Tighten, if possible – Do NOT over tighten or you risk damage.
Clean up excess/spilt oil – Do NOT expose skin to any fluids.
Auto Reset - Loss of
Pressure &/or
Operation
Run adjustment check as per manual, if still not working Pressure
valve may be faulty
Quick Release
Valves
Contamination
Keep clean, replace if necessary
8.3 Electrical Faults
Problem
Solution
Electric Wiring /
Componentry
If under Warranty period contact dealer. Never manually feel
for exposed wires etc