5.3 Parts Replacement
For a list of the replaceable parts for your machine, see the relative Machine Manual
& Parts Book. For any parts not covered in these documents, contact Sumo directly,
as they may be relevant to a set period of manufacture. Sumo do not sanction the use
of any products/parts not produced and managed by Sumo. Using external products
will invalidate your warranty. When ordering replacement parts please have your
serial number, part numbers and quantities at hand.
When tightening points to legged machines, do NOT use an air rachets, or over tighten
with spanners. Excessive tightening will result in points cracking. Use standard ISO
torque values for the fasteners suggested by the Parts Books, unless otherwise
specified.
To Next Page
Loading...
