31 | P a g e
Leading Disc
The leading disc depth can be adjusted by removing the
bolts and rotating the unit to the desired position, to
make the working action more or less aggressive.
Auto-Reset Leg Depth
Caution! Check leg is always deeper than the coulter.
Full Retracted Lowest Position
25mm leg depth pin fitted below the leg arm as a depth stop. Hydraulically
retract all legs before adjusting pin.
Loosening leg guide setting:
• Cereals 100-150mm (4-6”)
• OSR/Beans 150-225mm (6-9”)
To Next Page
Loading...
