36 Sun Fire X4150 Server Product Notes • February 2010
2. Click the Control Tab.
3. Set timeout to disabled.
Remote Console Mouse Performance on Solaris OS
When running the Remote Console on the Solaris 10 operating system, the mouse
performance might be slow. To fix this issue:
1. Log in to the ELOM web GUI and start the Remote Console.
2. Using the Remote Console window, run the following in a Solaris terminal
window on the Sun Fire X4150 system:
type ‘xset m 1 1’
The mouse performance issue should be resolved.
Mounting a CD-ROM Does Not Work Properly if Run
from a Sun Fire X4150 System
Running an RKVMS session from a Sun Fire X4150 system running Solaris will not
allow the user to mount a Virtual Device. This must be done from a remote Solaris
system. This is being investigated.
Cannot Issue Solaris OS Break Command Through Serial
Console
A Solaris OS break command entered through the ELOM serial console will not
work correctly.
Workaround
Either connect a monitor to the VGA port or initiate an web GUI remote console
session and enter the break command through one of those two methods.
ILOM System Management Issues
The issues in this section apply to ILOM. The following issues are included in this
section:
To Next Page
Loading...
