42 Sun Fire X4150 Server Product Notes ā¢ February 2010
SIA Installation Fails If the .iso Image Is Too
Large
If the .iso image size of the operating system being installed is bigger than the
/tmp file size, the SIA installation will fail.
This only occurs if the http or ftp installation method is used.
RHEL 5.2 Installation Fails With dmraid
Red Hat Enterprise Linux (RHEL) 5.2 installation via SIA fails when disks with
legacy dmraid information are used.
Workaround
Use a clean RHEL disk without legacy dmraid information.
Installing Windows 2003 Using SIA From a NFS
Share or FTP Share Does Not Work
Installing Windows 2003 from a NFS share or FTP share does not work with SIA.
Note ā This is planned to be fixed in a future release of SIA.
Monitor Resolution Might Need to be Reset After
Installing Linux Using SIA
For most Linux installations using SIA, the monitor resolution will need to be reset
during the first-time-boot configuration, which runs after the OS installation is
completed.
To reset the monitor resolution:
1. Configure the type (make/model) of the monitor.
2. Set the correct monitor resolution.
To Next Page
Loading...
