- 25 -
Face detection detects human faces in the configured area.
Face Detection cannot be enabled when Perimeter Protection, People Counting or Auto Tracking is
turned on.
10.2 Object Detection
4
Intrusion Detection
Intrusion detection detects objects that enter a specified area in live video and triggers alarm
when such an event is detected.
Trigger Actions:
Upload to FTP: this will send snapshots to FTP server once the alarm is triggered. For details, see
Chapter 3.4.
Trigger E-mail: this will send an email notification for the alarm along with a snapshot. For details,
see Chapter 3.3.
Intrusion detection cannot be enabled when either of the face capture or people head counting is
turned on.
In the Detection Rule area,
click to add a new detection
area. Drag the borders of the
box to set the intended
position and range. You can
set the sensitivity, level and
time threshold (minimum
time the intruder stays in the
detection area before the
alarm triggers) for the camera
to decide whether to trigger
an alarm.
Select Face Detection and then click .
Please leave it disabled.
Add a pre-designated view as a home
position preset, please refer to
Chapter 6.3 for detaills.
Select Intrusion and
then click .
Please leave it disabled.
2
1
Set Detection Object type and size.
3
Add a pre-designated view as a home position preset,
please refer to Chapter 6.3 for detaills.
4
Click Save and then enable it.5
To Next Page
Loading...
