SUNBA Performance Series - Page 24

Trigger Actions:
Upload to FTP: this will send snapshots to FTP server once the alarm is triggered. For details, see
Chapter 3.4.
Trigger E-mail: this will send an email notification for the alarm along with a snapshot. For details, see
Chapter 3.3.
Object moving cannot be enabled when either of the face capture or people head counting is turned on.
Detect unattended objects le behind in a specified area and trigger alarms.
10.4 Object Left
Trigger Actions:
Upload to FTP: this will send snapshots to FTP server once the alarm is triggered. For details, see
Chapter 3.4.
Trigger E-mail: this will send an email notification for the alarm along with a snapshot. For details, see
Chapter 3.3.
Intrusion detection cannot be enabled when either of the face capture or people head counting is
turned on.
Detect objects in the specified area and trigger alarms when they were moved.
10.3 Object Removing
- 23 -
Select Enable Object. .Moving Detection.
1
In the Detection Rule area, click to
add a new detection area. You can set
the sensitivity level and time threshold
(minimum duration an object is
detected in the specified area to trigger
an alarm) before the alarm triggers.
2
Select Enable Object. Le Detection. .
Moving Detection.
1
In the Detection Rule area, click to
add a new detection area. You can set
the sensitivity level and time threshold
(minimum duration an unattended
object is detected in the specified area
to trigger an alarm) before the alarm
triggers.
2