The Mini Barista Espresso Machine
features Auto Shot Volumetric Control.
It pours just the right amount of espresso
then automatically stops.
One Cup- Pours 1 Shot Espresso- 30mL
Two Cup- Pours 2 Shots Espresso- 60mL
You can adjust the pour volume to suit how
you like your coffee.
Preparing for Shot Programming
• Check Water Reservoir
Ensure there is enough water in the Water
Reservoir.
• Power
Ensure that:
- Operating DIAL is in the vertical READY
position.
- The Power Plug is inserted into the outlet
and turned on.
- The machine is ON and in the Ready state.
One Cup - Shot Volume Program
- Press & hold the ON/OFF BUTTON for 4
seconds or until a
flashing light combination
between the
ON/OFF & READY LIGHTS
begins.
- Insert a One Cup Filter Basket into the
Group Handle & fill with coffee grinds then
tamp. Place in the Group Head.
- Turn the DIAL to the ONE CUP position.
The ON/OFF & READY LIGHTS will continue
to flash once every few seconds.
Espresso will start to pour.
- When you reach your desired 1 Shot
Volume, return the DIAL to the vertical
READY position.
The espresso pour will stop.
The new 1 Shot Volume has been
programmed. The Programming Mode has
finished and returned to the Ready state.
16
Shot Volume Programming
To Next Page
Loading...
