Sunbeam SB700 - Stitch Selection Guide; Triple Straight Stitch for Strong Seams; Triple Zig-Zag for Durable Seams

Triple straight stitch: (1/3)
For hardwearing seams.
Pattern selector on “A”.
Turn the stitch length dial to “S1”.
The machine sews two stitches forward and one stitch backwards.
This gives triple reinforcement.
Triple zig-zag: (2/4)
For hardwearing seams, hems and decorative seams.
Pattern selector on “B”.
Turn the stitch length dial to “S1”.
Adjust the stitch width dial to between “3” and “5”.
Triple zig-zag is suitable for rm fabrics like denim, corduroy, etc.
Stitch selection
32