Assembly/Playhouse
Hardware
Needed
m
Note:
At
least two people are needed during assembly.
* IMPORTANT: When installing any fastener, DO
NOT
overtighten.
From outside, place lower wall
(P1)
against posts 0N1,
W4) and slide down until pre-drilled holes align. Attach
wall with lag screws
(F7),
lock washers
(F8),
and flat
washers
(F9).
50
From inside, secure lower wall
(P1)
to posts
0N1,
W4)
with lag screws
(F7),
lock washers
(F8),
and flat washers
(F9)
in pre-drilled holes.
To Next Page
Loading...
