Suncast WRP7000 - Second Floor

Meijer.com
Assembly/Second Floor
Hardware Needed
• •
0
Q
•
•
G)
•
G
•
G
~
0
•
~
.x3 4Dxs
Oxz
8xs
[JJ No te: At least two people are needed during assembly.
1!' [i!J Note : All T-nuts must be pounded (with rubber mallet or hammer) into pre-drilled holes prior to assembly.
* IMPORTANT : When installing any fastener, DO NOT overtighten. • Use an extra washer if bolts protrude
pastT-nut..
55