Suncast WRP7000 - Page 86

Meijer.com
Final Assembly/Accessories (continued)
Attach qu i ck clip (A3) to t op of coated chain and attach
pre-assembled trapeze (A6)
to swing brackets (A 1).
Tie a knot to secure rope (A7) a t bottom on ins1de of
climbing wall.
86
Tie a knot to secure rope (A7) at top on inside of
climbing wall cross brace (W1 4).
Note: 00 NOT leave excess rope at the end of the
top knot.
Attach SB cover plate (M2) to swing beam (W26) end
with pan head screws (F11).
Note: Make sure cover plate is centered.