SunFounder PiCrawler Kit
9. Now that the VNC server has started, let’s change the settings for connecting from a Mac.
To specify parameters for all programs for all user accounts on the computer, create /etc/vnc/
config.d/common.custom.
sudo nano /etc/vnc/config.d/common.custom
After entering Authentication=VncAuthenter, press Ctrl+X -> Y -> Enter to save and
exit.
10. In addition, set a password for logging in via VNC from a Mac. You can use the same password as the Raspberry
26 Chapter 3. Play with Python
To Next Page
Loading...
