SunFounder PiCrawler Kit
ssh pi@raspberrypi.local
3. The following message may appear.
The authenticity of host 'raspberrypi.local (192.168.6.116)' can't be
˓→established.
ECDSA key fingerprint is SHA256:7ggckKZ2EEgS76a557cddfxFNDOBBuzcJsgaqA/
˓→igz4.
Are you sure you want to continue connecting (yes/no/[fingerprint])?
Input “yes”.
4. Input the password you set before. (Mine is raspberry.)
1. We now get the Raspberry Pi connected and are ready to go to the nextstep.
3.1.4 Install All the Modules
Make sure you are connected to the Internet and update your system:
sudo apt update
sudo apt upgrade
Note: Python3 related packages must be installed if you are installing the Lite version OS.
sudo apt install git python3-pip python3-setuptools python3-smbus
Install robot-hat module first.
cd /home/pi/
git clone https://github.com/sunfounder/robot-hat.git
cd robot-hat
sudo python3 setup.py install
3.1. Quick Guide on Python 35
To Next Page
Loading...
