SunFounder TS-10 10.1-inch Touch Screen
The pins of Raspberry Pi have three ways to name them. They are wiringPi, BCM and Board. Among these naming
conventions, the 40-pin GPIO Extension board uses the naming convention BCM.
The following table shows the naming convention for WiringPi, Board and the intrinsic Name of each pin on GPIO
Extension board.
For example, for the GPIO17, the Board naming method of it is 11, the wiringPi naming method is 0, and the intrinsic
naming method of it is GPIO0.
196 Chapter 6. APPENDIX
To Next Page
