Sungrow COM100 User Manual

21
ffiigguurree 44--44 Three-phase four-wire connection
step 5 Check the cable for correct connection, and then secure it with screw, where the
fastening torque is 5.5N·m.
-- -- EEnndd
For parameters of the circuit breaker on transformer side, refer to those of the
circuit breaker inside COM100 shown in the figure above.
4.5 Communication Methods
The COM100 can collect the operating data of the inverter, transformer and other
equipment in the system and upload it to the remote monitoring system.
Users can check the operation information and set the parameters via the remote
monitoring system, for more details, refer to .
User Manual 4 Electrical Connection

Sungrow COM100 Specifications

General

Brand	Sungrow
Model	COM100
Category	Conference System
Language	English