Sungrow EMS200 - Mechanical Installation

8
5 Mechanical Installation
5.1 Unpacking and Inspection
Check for completeness of the scope of delivery according to the packing list in
the carton.
A
B
D
G
C
E
F
H
Fig. 5-1 Scope of delivery
No
Name
Description
A
local controller
-
B
Enclosed
documentation
User manual, delivery inspection records, packing
list, warranty card, and quality certificate
C
Communication
terminal
resistor
12x120Ω
Note: When the RS485 bus is connected to more
than 15 devices, it is recommended to connect 120-Ω
terminal resistors in parallel to cables A and B on the
two ends of the bus
D
Network Cable
Length: 1x2m
E
Hanger
2
F
Fastener
combination
Cross recessed pan head tapping screws
G
OT terminal
RNBL5-4
H
Nylon cable
tie
Fastening cables