13
1. Images in this manual are for reference only. The actual product received may
differ.
2. The number of parts marked with “
2
” is greater than required. Please refer to
the installation steps for the specific quantity needed.
* Only SBR064 provides empty module, SBR096-256 does not provides empty
module.
3.3 Storage
Proper storage is required if the battery is not installed immediately.
• Store the battery in the original packing case with the desiccant inside.
• Preferably, keep the temperature in the range of 15℃ - 25℃ and install the battery as
soon as possible. Store the battery within the temperature range of -10℃ to 35℃ for no
more than 12 months(The start of the storage time is the production time of the battery
module).
• The storage relative humidity must be always between 0 and 95%, non-condensing.
• Store the battery in a clean and dry place, without exposure to sunlight and rain. The
storage location must be free of harmful gases, flammable/explosive products and corro-
sive chemicals. The battery should be prevented from mechanical impact, high pressure,
high-intensity magnetic field and direct exposure to sunlight.
• Pay attention to the harsh environment, such as sudden cooling/heating and collision, to
avoid damage to the battery.
• The number of stacking layers of battery modules with package must not exceed 6. It is
strictly forbidden to directly stack batteries without package.
• Regularly inspect the package for damage and insect bites. If any damage is found, the
product should be replaced immediately.
• The packing should be upright.
• If stored for more than 12 months (Calculated from battery production date) under the
specified conditions, the battery needs to be charged once, until the system SOC is 30%.
Preferably, use an hybrid inverter for forced charging.
If the battery is stored over one year, 5% - 10% of the capacity may lose
irreversibly.
User Manual 3 Unpacking and Storage
To Next Page
Loading...
