29
Black Start:
If the communication is established for the first time between the battery and the
hybrid inverter, and the hybrid inverter has no DC power supply and no AC power
supply. Manually connect the DC breaker on the right side of the battery so that
the BMS enters the self-test state. The status indicator blinks in blue. Ten seconds
later, press and hold the status indicator for less than 2 seconds. Wait until the in-
dicator is steady on in blue, which indicates that the battery system is powered on
and runs normally.
step 3 Close the protective cover.
User Manual 5 Commissioning
To Next Page
Loading...
