1
1 Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
SG3KTL-M, SG4KTL-M and SG5KTL-M inverter are designed and tested in accordance
with the international safety requirements. But as with all electrical and electronic
equipments, certain precautions should be observed during installation, operation
and maintenance work.
There is a risk of inverter damage or personnel injury!
Various plug-in interfaces are provided on the bottom of the inverter. Do
not open the enclosure at any time. Loss of any or all warranty rights may
follow if otherwise.
Operation or work performed incorrectly can result in damage to:
y
The life and well-being of the operator or a third party
y
The inverter and other properties that belong to the operator or a third party
To reduce the risk of injury and ensure the normal operation of the inverter, you
must read over and follow all the instructions, cautions and warnings.
All installation and electrical work must only be performed by qualified
personnel. They have
y been trained specially;
y already completely read through and understood the manual and other
related documents;
y been familiar with safety requirements for electrical system.
Technical personnel mentioned above may perform the following work:
y
Secure the inverter to the wall
y
Connect the inverter to the PV power system
y
Connect other devices to the PV power system
To Next Page
Loading...
Need help?
General