Sungrow SH10T User Manual

49
step 2 Take out the terminal plug from the housing.
step 3 Thread the AC cable of appropriate length through the swivel nut and the housing.
step 4 Strip the cable by 80 mm. If the cold-pressed terminal is to be crimped onto the cable, the
cable stripping length should be 2~3 mm plus the length of the metal body of the terminal. If
the cold-pressed terminal is not used, strip the cable by 14~16 mm.
User Manual 6 Electrical Connection

Sungrow SH10T Specifications

General

Brand	Sungrow
Model	SH10T
Category	Inverter
Language	English