14
D. Set Y Scale %
1) Press to display item “Y-Scale”.
2) Press , to set within the range
of 20%~200%.
–/BACK+/FORWARD
SELECT
E. Adjustment of Presser Plate Height
a. Adjustment of ascending height
1) Press the key to display the
height of the presser foot when it is lifted.
2) Set the height within the scope of H 10 ~ H 17 by
pressing and .
3) Press the key to save the changed values and
make the machine return to the ready mode.
READY
–/BACK+/FORWARD
Communication ready
b. Adjustment of descending height
1) Press the key to display the height
of the presser foot when it descends.
2) Set the height within the scope of L 1 ~ L 17 by pressing
and .
3) Press the key to save the changed values and
make the machine return to the ready mode.
READY
–/BACK+/FORWARD
CF card download
To Next Page
Loading...
