13
Press to set the machine back to the default value.
Press to increase/decrease the set value or to move the needle bar backward or forward.
One click to call a certain pattern.
4-2) Setting Item Data
You can set each item in the following order.
A. Turn on the power.
Item “Pattern No.” will lit up and the previous pattern number will appear.
B. Set the pattern number.
C. Set X Scale %.
Pattern No. X Scale % Y Scale % Sewing Speed
1) Press to display NO.
2) Press , to display “2” on the
screen (setting pattern No.2).
※ Refer to the program list.
–/BACK+/FORWARD
SELECT
1) Press to display item “X-Scale”.
2) Press , to set within the range
of 20%~200%.
–/BACK+/FORWARD
SELECT
1) For direct connection type, if the head is laid down on the side while the power is on,
““
oPEn
””
will appear. If READY key is on at this time, sewing does not start with your pedaling.
2)
If the head is laid down on the side while sewing,
““
oPEn
””
will not appear until sewing is
completed.
Caution
To Next Page
Loading...
