SunStar SWF/C-UK1502 - Page 69

7-25
Move the cursor to set up the X Scale
and press
Input “150”using the numerical
keys.
Move the cursor to set up the Y Scale
and press
Input “120”and press
X_SCALE : 100
[RANGE : 50-200[%]]
==>
X_SCALE : 100
[RANGE : 50-200[%]]
==>150
Y_SCALE : 100
[RANGE : 50-200[%]]
==>
1] X_SCALE : 150[%]
2] Y_SCALE : 100[%]
3] ANGLE : 0
4] MIRROR : NO MIRROR
X Scale was set at “150”
1] X_SCALE : 150[%]
2] Y_SCALE : 120[%]
3] ANGLE : 0
4] MIRROR : NO MIRROR
Y Scale was set at “120”
Press