7-64
1. Start point
2. Stitch for offset
3. Stitch for finish of embroidery
4. Middle offset point
5. Offset point
a) ④ : path at the start of the embroidery
b) ①→③→① : Movement from the offset stitch to the
offset point
c) ②→③ : path after the embroidery is finished
[CAUTION]
1. Middle point and offset point may be the same.
2. Offset data is automatically deleted when you call a new design.
Ex) Offset set-up
1. Start point: X=－300, Y=500
2. Middle point: X=600, Y=1500
3. Offset point: X=800, Y=2000
Press in the start menu
X : 0, Y : 0
=== START POINT ===
=> FRAME MOVE
Set X=－300, Y=500 using
key and press
X : 0, Y : 0
=== MIDDLE OFFSET ===
=> FRAME MOVE
To Next Page
Loading...
Need help?
General
