5-17
5-11) IN AND OUT OF DESIGNS
You can use a floppy disk or a tape reader to read a design with SWF Machine. You can write the design on the
floppy disks. See for details.
5-12) RETURN TO PREVIOUS LOCATION IN UNEXPECTED BLACKOUTS
Your SWF machine goes back to the location of stop to pick up stitching when the power comes back on after
unexpected blackouts. See for details.
7.4.7) Frame Movement
7.4.1) In and Out of Designs
[CAUTION]
Make sure to turn OFF the power in unexpected blackouts until the power comes back on.