1-4
Observe the directions on ALL warning stickers placed on the machine as
reminders for your safety.
1) Location of Warning Stickers
1-5) Placement of
Warning Stickers
Fire or death may be caused by
high voltage electric shock.
Don’t open the cover except for
service man assigned by SWF.
When open the cover turn off
power and wait for 6 minutes.
Open the upper shaft cover of
each head and supply the
designated oil.
Injury may be caused by winding.
Be sure to turn off the power
before cleaning, lubricating,
adjusting or repairing.
Physical damage may be
caused by winding.
Don’t put your hands near the
arrow while the main shaft is
rotating
Injury may be caused by moving
needle.
Ensure that the machine is in a
stop condition before changing,
threading or rethreading of
needies or changing of needles.
Turn off the main power before
rotating the main shaft by hand!
Do not remove covers during
operation!
Turn off the main power before
opening electricity-related boxes!
Physical damage may be caused
by interposition.
While embroidery frame is running
according to the direction of
embroidery frame may be injured
your hands by gap between fixed
body and embroidery frame.
Physical injury may be caused
by crevice.
Don t put your finger in a groove
on the table.
[Fig.1-3 Front]
[Fig.1-4 From top]
To Next Page
Loading...
Need help?
General
