7-14
Move the cursor using the UP and
DOWN keys to “30”.
SELECT EMPTY ROOM
===> # 30
EMB READ : 55[%]
[>>>>> ]
The screen shows the copying progress.
No. : 30
STITCH : 12346
COLOR : 6
JUMP : 10
1. BASIC SETTING
2. NEEDLE SETTING
= USER SELECT FORMAT =
1. DOS 2.ZSK
2. BAR FMC 4.BAR FDR
3. EXIT OR PREVIOUS
DOS : 2HD, 2DD USUAL DISKETTE
ZSK : ZSK DISKETTE
BAR FMC : BARUDAN FMC
BAR FDR : BARUDAN FDR
EXIT or PREVIOUS : END
Design from room no. 30 has been called.
Function that input automatically
needle bar of ZSK diskette.
(You can select information of
needle bar in case of copy design of
ZSK diskette)
When diskette constantly appears
error, you may select another
diskette to press
ZSK NEEDLE SEQ
MANUAL(0), AUTO(1)
MANUAL SELECT To save previous
needle bar information.
AUTO SELECT
To save present needle bar
information of design.
Press
Press
To Next Page
Loading...
Need help?
General
