SWDM320HB OPERATOR’S MANUAL
1 Safety Rules
1.1 Safety Instruction
1.1.1 Safety Level
The security matters of this regulation are divided into three grades:“Danger”“ Warning”
“Attention”
《Danger》： If not avoided, will result in death or serious injury.
《Warning》： If not avoided, will result in death, serious injury and heavy equipment loss.
《Attention》： If not avoided, will result in hurting operator or equipment loss
1.1.2 Safety Signs
Safety signs are used to alert safety. If you see this sign in the machine or in the operating
instructions, you should be aware of the danger of injury.
Read and understand carefully, follow all the safety on the machine, as well as the safety of
this manual.
Need to maintain and update the security logo in time,
always keep the sign clear, eye-catching and firm.
1.1.3 Safety Scutcheon
Different parts of the machine have different safety signs, which are labeled with different
degrees of hazard, such as “Danger”“ Warning”“ Attention”(See right figure).
Danger---indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
Warning---indicates a potentially hazardous situation
which, if not avoided, could result in death or serious injury
Attention---indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate injury
“Danger”and“Warning” are set to specific locations within the range of possible hazards.
General Announcements are on“Attention”.In this manual, “Attention” is also used remind
To Next Page
Loading...