Need help?Do you have a question about the SUNWARD SWDM320HB and is the answer not in the manual?
Guidance on safe operation levels, signs, and hazard identification.
Specifies maximum allowable slopes for parking, travel, and operation to ensure stability.
Details conditions and factors influencing equipment stability, including load relationships.
Defines the safe working area around the machine and the need for warning signs.
Illustrates the operator's field of view and visibility angles from the cab.
General safety measures covering fire prevention, wear, and operating near obstacles.
Crucial safety advice before and during operation, covering various scenarios and personnel conduct.
Describes essential safety equipment like emergency exits, extinguishers, and stop buttons.
Warns against unauthorized modifications that compromise machine safety and performance.
Outlines the types of soil and geological conditions suitable for drilling operations.
Specifies optimal ambient temperature, ground gradient, and environmental limits for operation.
Details the machine's structure, components, and key technical specifications.
Explains the functions and operation of various controls and indicators on the machine's console.
Covers the layout and functionality of the cabin's control interfaces, monitors, and displays.
Instructions for operating the machine's travel functions using pilot handles and pedals.
Details how to extend and retract the crawler system using pilot handles and membrane keys.
Explains the operation of the upper carriage rotation using pilot handles.
Instructions for controlling the big arm's luffing (up/down) motion using pilot handles.
Guides the operator on how to erect and position the mast using the right electric handle.
Describes the operation of the main winch, including speed control and floating function.
Explains how to operate the auxiliary winch using the right pilot handle.
Details the operation of the rotary head rotation, including speed, torque, and throwing functions.
Covers the operation of the pressurization system using the right pilot handle.
Instructions for operating the mast outriggers using the right pilot handle.
Explains how to adjust the pressurized winch wirerope tension using pilot handles.
Details the operation of the cathead lifting cylinder using pilot handles.
Describes the operation of the rotary brake cylinder, noting its availability on specific models.
Lists essential pre-operation checks for drilling tools, fluid levels, ropes, and components.
Step-by-step guide for starting the engine, including preheating and self-check procedures.
Instructions for safely positioning the rig on the job site, including ramp angles and mast height.
Detailed procedures for assembling the machine, including crawler extension and mast erection.
Covers rig trial running, drilling tool selection, hole opening, barrel installation, and drilling procedures.
Procedures for assembling the machine, including upper/undercarriage, drill mast, and counterweight.
Guidelines for transporting the machine, including different postures and disassembly requirements.
Important safety considerations for handling and securing the machine during transport.
Procedures for storing the machine properly, including preparation and maintenance during storage.
Crucial safety guidelines and risks associated with performing maintenance on the machine.
Outlines the schedule and procedures for routine maintenance, including lubrication and checks.
Introduction to Kelly bars, their types, operation, maintenance, and repair technologies.
Description and application of various drilling tools, including augers, buckets, and reaming bits.
Provides diagrams and dimensions of the machine's configuration.
Lists key technical specifications and parameters for the drilling rig.
To Next Page
General