151
Warning
Exposed hydraulic oil and
lubricant can cause fire and injury to
person.
To avoid this hazard:
Stop the machine to firm level ground, lower
bucket to ground.
Stop the engine, remove key from starting
lock, set pilot safety lock lever to LOCK
position.
Check hose for any twist, abrasion, check
hose clamp for looseness or lost. Check
damages of cooler. Check flange for looseness,
and oil leakage.
When clamping, repairing or replacing any
loosened, damaged, lost hose clamp, hose,
pipe, oil cooler and its flange bolt, do not bend
or hit high-pressure hose, do not install twist
or damaged hose or piping.
To Next Page
Loading...
