SUNWARD SWE150F - Secure the Machine

49
2.1.5 Secure the machine
Note
 Secure the chains or slings to the
machine frame. Do not place the chains
and slings across or press on the
hydraulic piping or hoses.
 When placing the machine on the specified
position of the trailer, fold working equipment
to transportation configuration, lower the boom,
place an wooden block under bucket cylinder
to prevent damages to it during transportation.
 Pull the pilot safety lever to LOCK position,
stop the engine, remove engine starting key,
and lock the cab door securely.
 Chock the front and rear position of the track
to prevent machine movement during
transportation.
 Fix the four corners of the machine and front
accessories to the trailer with chains or wire
ropes.
 Raise the ramp located on the rear part of the
trailer then fix it.