EasyManua.ls Logo

SUNWARD SWE150F - User Manual

SUNWARD SWE150F
216 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operation & Maintenance
Manual
SWE150F/SWE210F
HYDRAULIC EXCAVATOR
Sunward Intelligent Equipment Co.,Ltd
2015-07

Table of Contents

Questions and Answers

  • C
    corey12Aug 5, 2025
    How to fix SUNWARD Excavators engine that is difficult to start?
    • N
      Nathan NielsenAug 5, 2025
      If your SUNWARD Excavators engine is difficult to start, it could be due to several reasons. Check the fuel level and quality, ensuring it's the correct type and not polluted. Also, inspect the wiring and battery power. A clogged air or fuel filter, internal fuel system leakage, or air in the fuel system can also cause this issue. Try adding fuel, bleeding the air from the fuel system, draining and replacing off-grade fuel, checking the starting circuit, charging or replacing the battery, cleaning or replacing the filters, pushing down and securing the hand wheel, using the manual pump to bleed air, or replacing the start motor.
  • B
    boonechristopherAug 11, 2025
    How to reduce excessive oil consumption in SUNWARD Excavators engine?
    • J
      Jennifer HicksAug 11, 2025
      Excessive oil consumption in your SUNWARD Excavators engine can stem from a few issues. Ensure you're using the correct engine oil; if not, drain the current oil and replace it with the specified type. Check for any oil leakages in the delivery system and repair them. Also, make sure the engine temperature is not excessively high, and check the cooling system.
  • A
    Austin WrightAug 16, 2025
    Why is my SUNWARD Excavators engine not making full power?
    • D
      David DavisAug 17, 2025
      Your SUNWARD Excavators engine might not be making full power due to several reasons: * A clogged air filter: Clean or replace the filter. * Fuel piping issues: Clear any clogging or replace the piping if there's a malfunction in oil delivery. * Improper fuel: Drain the existing fuel and replace it with the correct type. * Clogged fuel filter: Bleed air from the fuel system. * Polluted or malfunctioning ejection oil nozzle: Clean or change the filter.
  • A
    Alison LynchAug 23, 2025
    What to do if SUNWARD Excavators engine is overheating?
    • I
      idavisAug 23, 2025
      If your SUNWARD Excavators engine is overheating, consider these potential causes and solutions: * **Low coolant level:** Add coolant to the system. * **Improper coolant:** Drain the existing coolant and replace it with the specified coolant. * **Radiator clogging:** Clean the radiator and front strainer to ensure proper airflow. * **Defective fan:** Replace the fan if it's not functioning correctly. * **Fan belt issues:** Adjust or replace the fan belt if it's worn or loose. * **Defective belt pulley:** Replace the belt pulley. * **Defective cooling system:** Clean up cooling system. * **Defective temperature sensor:** Change temperature sensor. * **Separator sponge peel off:** Replace separator sponge.
  • H
    Heather EverettAug 29, 2025
    Why is the exhaust gas white in SUNWARD SWE150F Excavators?
    • T
      Tracey AllenAug 29, 2025
      White exhaust gas in your SUNWARD Excavators could be due to improper fuel. Try draining and replacing it with the proper fuel. It might also happen if the engine temperature is too low; in that case, run the engine to warm it up.

Summary

Foreword

1 Safety rules

1.1 Safety labels

Details on the placement and maintenance of safety labels on the machine.

General safety information

Broad safety principles for operation, including instructions and hazard awareness.

Safe Operation Instructions

Guidelines for safe machine operation, including pre-start checks and procedures.

Transportation and Storage Safety

Safety rules for transporting, towing, and storing the machine securely.

Maintenance Safety Information

Essential safety information and precautions for performing maintenance tasks.

High Pressure System Safety

Safety rules and precautions for handling high-pressure hydraulic systems and components.

3 Operation

Controls and Gauges

Overview of the machine's control panel, levers, and gauges for operation.

Multifunction Monitor System

Explanation of the main interface, indicators, and system functions on the monitor.

Engine Controls

Information on starting the engine and adjusting engine speed using control knobs.

Machine Operation and Control

Detailed guidance on operating the machine, settings, and safety practices.

Work Procedures

Step-by-step instructions for common excavation and operational tasks.

4 Maintenance and Service

Daily Inspection Before Start-up

Procedures for daily checks before starting the engine for safe operation.

Maintenance Schedule

Scheduled maintenance tasks based on operating hours.

Running-in Period Maintenance

Specific maintenance required during the initial 50 hours of machine operation.

Every 50 Hours Service

Maintenance tasks to be performed every 50 hours of operation.

Every 100 Hours Service

Maintenance tasks to be performed every 100 hours of operation.

Every 250 Hours Service

Maintenance tasks to be performed every 250 hours of operation.

Every 1000 Hours Service

Maintenance tasks to be performed every 1000 hours of operation.

Every 2000 Hours Service

Maintenance tasks to be performed every 2000 hours of operation.

4.6 General Troubleshooting

Guidance for diagnosing and resolving common engine and system problems.

5 Technical Specifications

SWE150 F Machine Specifications

Detailed technical specifications for the SWE150F model.

SWE210 F Machine Specifications

Detailed technical specifications for the SWE210F model.

6 Accessories and Option Parts

Safety Items for Accessories

General safety precautions for installing and using optional attachments.

Hydraulic Quartering Hammer (Option)

Details on the hydraulic quartering hammer, its uses, control, and safety.

Option Lists

List of available optional parts and their specifications for different models.

7 Manufacturer Information

SUNWARD SWE150F Specifications

General IconGeneral
Bucket Capacity0.6 m³
Digging Force (Arm)70 kN
Max Digging Height9, 400 mm
Transport Length7, 700 mm
Engine Power86 kW

Related product manuals