202
1.Please lower centrobaric of work attachment to prevent anteverting when the
machine downhill.
2.Forbid the machine along the slope side, prevent it from tipping.
3.Forbid swing in the slop.
4.After installing the heavy work equipment, machine swing flight will
increase.Therefore, misjudgment will-make-the machine will crash surrounding
objects, and the surrounding-objects should allow sufficient margin-whenope
ration. In addition, natural subsidence will increase (when the device stopp
ed working in mid-air, under its own gravity, will gradually decline.
5.After installing long work attachment, work range will suddenly become
larger, so it has the dangerous of corrosion objects and misjudged distance.
When operate work attachment, please keep distance to any object in the area.
6.3 Hydraulic quartering hammer(option)
Different excavator must assemble different hydraulic quartering hammer, please consult Sunward
before assemble hydraulic quartering hammer and confirm the model of hydraulic quartering hammer
6.3.1 Main use of hydraulic quartering hammer：
a) Crush rock
b) Demolish buildings
c) Repair road
6.3.2 Hydraulic hammer assembly
Sunward medium-sized excavators with broken line, including two way hydraulic circuits, two
cut-off valves, they are located on both sides of the bucket rod, line terminal is the quick change
joint which is connected accessories as shown in figure:
To Next Page
Loading...
