164
4.5.3.6 Check washer fluid level
Check reservoir for fluid level, add fluid if
necessary.
When adding fluid, pay attention not to allow
any dusts to get in.
Mixture ratio of pure washer fluid and
water
The mixture ratio differs according to the
ambient temperature. So dilute the washer fluid
with water following the table below.
Note: Pure detergent are divided into 2
categories： -10°C （14°F）(general use)
and -30°C （-22°F）(cold area use). Select
according to the area and season.
Operation area Mixing ratio temperature
In general
Pure detergent1/3：
water 2/3
-10°C (14°F)
Cold area
winter
Pure detergent 1/2：
water 1/2
-20°C (-4°F)
Extreme area
winter
Pure detergent -30°C (-22°F)
To Next Page
Loading...
