63
icon is red, or is white.
（21）
means the accelerograph shift,1~10.
means the engine is warming icon. when machine is started if engine speed less than
1200rpm and the temperature of cooling water under 25C, then engine will turn to warming.
if press the one key idle button, this icon will show in this position. After start the
warming icon, the engine speed is less than 1200 r and engine water temperature is less than
25 ℃, the machine will enter into warming status, the icon is flash in the process of warming.
Press the idle speed switch, it will display, means the engine enter into idle speed.
3.2.5.2 means eight situations of regeneration, ① green is auto regeneration,②yellow
and buzzer is hand regeneration, ③yellow and blink is hand regeneration require, ④
red and blink is emergency hand regeneration require.
If hand regeneration require is appeared on the main interface, it will enter into the
following interface:
To Next Page
Loading...
