2.9 COMBINATION CONTROL SWITCH
1.Gear select switch
There are three speed gear on this switch,turn the switch from 1 to 3 to adjust three differenet speed.
2.Reversing contol switch
F=Forward gear ……………… push the knob forward（machine move forward）
N=Neutral gear ……………… the middil（machine stop）
R=Reverse gear ………………push the knob backward（machine move backward）
Attention：
When started the engine，the reversing contol switch must be the neutral gear.
the reversing contol switch can control the machine move.
when the reversing contol switch on the reverse gear,the astern buzzer will ring,the light will
light.
COMBINATION
CONTROL
SWITCH
To Next Page
