47
to contact your dealer immediately.
In view of their size, when the boom is lowered and retracted, some accessories may interfere with
the front tyres and damage them if the board is tilted downward.
To eliminate this risk, extend the telescopic system far enough to eliminate, the interference (the
distance will depend on the truck and the accessory).
The maximum loads are defined by the lift-truck’s capacity, bearing in mind the weight and centre
of gravity of the accessory. If the capacity of the accessory is below that of the lift-truck, never
exceed this limit.
Before putting any type of accessory into operation on the fork-lift truck, check the machine’s
compatibility and the calibration of the safety system with regard to the accessory used.
7.2 ATTACHMENT TOOL
This manchine can use many kinds of attachment tool to adpat to different
working environment.
Sunward can design the attachment tool to meet the customers.
7.2.1 Floating goods fork
Feature
Name Serial namber
Rated
load
(lbs.)
Dimension（ft.）
Gravity
center
（ft.）
Weight
（lbs.）
Length Width Height
Floating
goods
fork
815307000000 7716 4.88 3.85 3.7 1.64 628
To Next Page
Loading...
