Product description
NT 10000...NT 12000 3
The cell output decreases as the module temperature increases. Install your
solar generator with sufficient ventilation at the rear.
Check your solar generator approx. every three years for soiling. This occurs
especially on the lower edge of the modules and forms a haze that cannot
be washed off even by heavy rain. Yield reduction can be prevented by
cleaning the modules with a wet cloth or a brush.
Avoid shading of individual modules or solar cells in your system. This can
lead to major reductions in yield.
Standard components of a so-
lar system
Depending on the recommendations of your PV planning expert, your PV sys-
tem consists of the following components:
1 Solar generator
2 Solar Inverter with integrated DC
load break switch
3 Mains fuse and energy meter
Options
4 Irradiance sensor with integrated
temperature sensor
5 PC for monitoring system
6large display
1
4
5
2
3
6
DC
AC
To Next Page
Loading...
