EasyManua.ls Logo

Sunways NT 10000 - Safety precautions; 2.1 General safety precautions

Sunways NT 10000
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety precautions
NT 10000...NT 12000 7
2 Safety precautions
2.1 General safety precautions
Follow the instructions in the
operating manual.
Safe handling and trouble-free operation of the NT Solar Inverter requires
knowledge of the basic safety precautions.
This user manual contains the most important information for operating the
system safely.
Each person concerned with the installation, commissioning, maintenance and
operation of the Solar Inverter must have read and understood the entire user
manual, and in particular the chapter entitled Safety Precautions.
In addition, the rules and regulations for accident prevention applicable for the
operating site/plant must be observed.
Risks associated with handling
the NT Solar Inverter
The Solar Inverter has been built in accordance with state-of-the-art technology
and the recognised safety rules and may only be used
for its intended purpose and
in safe condition.
Improper use may lead to dangers to the life and limb of the user or others, or
can adversely affect the system or other property.
In case of malfunctions which can impair safety, the system must be shut down
immediately and secured against being switched on again. The malfunction
must then be eliminated immediately.
Warranty and liability The General Terms and Conditions of Sale and Delivery of Sunways AG always
apply. Warranty and liability claims for injuries and damage shall not be accep-
ted if they are due to one or more of the following causes:
Improper use of the Solar Inverter
Improper installation, commissioning, operation and maintenance
Operation of the Solar Inverter with defective and/or non-operational safety
and protective equipment
Failure to observe the information in the user manual regarding installation,
commissioning, operation and maintenance
Unauthorised modifications
Inadequate monitoring of wearing parts
Improper repairs
Emergencies caused by external influence or force majeure
Opening the cover and removing the safety seal without prior permission
from Sunways AG

Related product manuals