Super Circuits DVQ-2 - Reset to Factory Default; Clear HDD (Hard Drive)

4.3 RESET DEFAULT
Select ADVANCE> SYSTEM> RESET and press the ENTER button.
NOTE: (> = hit the ENTER KEY)
Reset all system settings to factory default settings.
MENU
RECORD
TIMER
DATE
ADVANCE
ADVANCE
CAMERA
DETECTION
ALERT
REMOTE
SYSTEM
NETWORK
HDD INFO
EVENT LOG
SYSTEM
SERIAL TYPE RS-485
BAUD RATE 02400
HOST ID 001
PASSWORD SETUP
RESET DEFAULT RESET
CLEAR HDD HDD MASTER
AUTO KEYLOCK NEVER
LANGUAGE ENGLISH
VERSION 1088-10-K2-04-AA-11
VIDEO FORMAT NTSC
5. Use LEFT key to select YES and press the ENTER button. The DVR will display a
REBOOT dialog box, beep and take a minute or two to Initialize.
Let’s CLEAR the HDD
.
4.4 CLEAR HDD
Return to the SYSTEM MENU and select CLEAR HDD and push the ENTER button.
RESET DEFAULT
RESET DEFAULT
ARE YOU SURE ?
YES NO
SYSTEM
SERIAL TYPE RS-485
BAUD RATE 02400
HOST ID 001
PASSWORD SETUP
RESET DEFAULT RESET
CLEAR HDD HDD MASTER
AUTO KEYLOCK NEVER
LANGUAGE ENGLISH
VERSION 1088-10-K2-04-AA-11
VIDEO FORMAT NTSC
22