Error Code in “SYSTEM LOG”: Description:
1) SYS ERR 01-YYY #defi ne SYS_ERR_AV087_ERR 1) Compression error
A.) YYY=000 Audio chip error
B.) YYY=001- AV087 Chip for CH1-4 error
2) SYS ERR 02-XXX #defi ne SYS_ERR_AV087_BUF_FULL Buffer is full
3) SYS ERR 03-XXX #defi ne SYS_ERR_AV087_BUF_EMPTY Buffer is empty
4) SYS ERR 04-XXX #defi ne SYS_ERR_IDE_ERR IDE interface error
5) SYS ERR 05-XXX #defi ne SYS_ERR_SCAN_DISK Disk scanning error
6) SYS ERR 06-XXX #defi ne SYS_ERR_TOP_FAT_ERR File system error
7) SYS ERR 07 (including 08, 09, etc.)-XXX #defi ne HDD error
4) OTHERS
Display “power on / off”, “unlock” and “reset to default” time information.
5) CLEAR ALL
Clear all event log lists.
5.16 Search
View events recorded, or search any specifi c events by event or time.
Press “SEARCH” button on the front panel.
3) SYSTEM LOG
Show system error codes. Reference error code list below:
SEARCH
HDD-MASTER-
FULL LIST
RECORD LIST
SYSTEM LIST
ALARM LIST
MOTION LIST
EVENT SEARCH
TIME SEARCH
1) HDD-MASTER-1
Press “ENTER” to select HDD if there are more than 1.
2) FULL LIST
Show all recorded type fi les. R: RECORD/ S: SYSTEM/ A: ALARM/ MS: MOTION/ T: TIMER
3) RECORD LIST
List of manual-recorded fi les.
4) SYSTEM LIST
List of system-recorded fi les.
Under manual recording mode, system will save one recorded fi le every hour.
5) ALARM LIST
List of alarm-triggered-recorded fi les.
6) MOTION LIST
List of motion-triggered-recorded fi les.
7) EVENT SEARCH
Playback recorded fi les by date, time (YEAR / MONTH / DAY / HOUR / MIN), channel, HDD, and event type (motion /
alarm triggered recording).
8) TIME SEARCH
Search recorded fi les by date and time (YEAR / MONTH / DAY / HOUR / MIN).
Note: fi l es will be played in fast forward use slow button to slow down video.
41
To Next Page
Loading...
