Super Circuits DVQ-2 - Page 53

h. System Confi g : Allows you to confi gure Network, DVR, Alarm and General settings. Very powerful tool for
remote control of your DVR. Will discuss the System Confi g in more detail in this section.
i. Number of Online Users
j. CH 1 ~ 4
k. 4 Channel Display
l. Search : Enter DVR search menu.
m. Record
n. Stop / Fast Rewind / Fast Forward / Pause / Slow Playback / Play
o.
p.
q. Digital Zoom : Digital zoom in/out
r. Set
:
Press to change channel display position.
Press “UP”, “DOWN”, “LEFT”, “RIGHT” buttons to select channel.
Press “+” or “-” to select channel display.
Press “Enter
” button to confi rm the setting.
s. Sequence
:
Activate call monitor function, and press again to exit. When motion is detected, the monitor will display motion
triggered channel.
t. Enter
: Used to confi rm settings or enter a selection.
u. PTZ Control On / Off:
Use to select the PTZ device, press “OK” button to enter selected PTZ. Press “ESC” to exit from PTZ control.
v. Menu / Up / Down / Left / Right :
Used to enter the PTZ menu /
w. (Not used) R.E.T.R. (Remote Event Trigger Recording)
:
Used for remote PC alarm notifi cation, and will record alarm fi les.
x. Search DVR Video Data :
Set data search criteria.
y. Turbo ON/ OFF
:
Use to speed up menu selection or control PTZ camera. Turbo step options 1 to 30.
Example: Setting turbo step to 3 will increase the speed of your up/down/left/right moves by 3.
53