15
3. OPERATING THE HEADLIGHT
• The SUPER73-S2 comes equipped with a front headlight and
rear brake light.
• To activate the headlight, press and hold down the up “^”
button on the display until the lights illuminate. Follow the same
step to turn off the lights.
• The rear light will get brighter when the brake levers are
engaged whether the headlight is on or off.
1. POWERING E-BIKE ON
• Disengage the kickstand, grab the brake handle to engage the
brakes, and seat yourself on the SUPER73.
• Press the battery power button to turn the e-bike on.
• Once the display screen is illuminated, the throttle or pedal
assist will be active and you’re ready to ride.
OPERATING THE BIKE
Do not sit on an e-bike while the kickstand is supporting the e-bike.
!
2. CHANGING THE INFORMATION VIEWED ON THE DISPLAY
• Quick press the “O” button to toggle the information viewed on
the display.
• Speed (mph/ kmh)
• Range (miles/km)
• Pedal Assist (0-4)
• Total (miles/km)
Perform the brake pad bed-in process before your first ride. For more information,
please see pg. 25.
!
DANGER!
Batteries that have not been fully inserted and locked can come loose during a ride
and fall out. This can cause an accident which may damage the battery and/or cause
injury or death to the user or others around the bike.
WARNING!
Do not place the key or any other metal object into the charging port as this can result
in a short circuit, rendering your battery nonchargeable and in need of replacement.
This will void the warranty.
!
To Next Page
Loading...
