9
IN THE PACKAGING
• 1 x lithium-ion battery
• 2 x keys for the battery
• 1 x battery charger
• 1 x set of pedals
• 1 x two-sided open-end wrench with 15 mm and 13 mm ends
• 1 x 5 mm hex wrench
• 1 x package of additional accessory hardware
ADDITIONAL RECOMMENDED TOOLS:
• 2.5 mm hex wrench
• 4 mm hex wrench
GOOD TO KNOW:
• Bolts for the handlebars mount are M6 X 12 mm socket head cap screws.
• The right pedal has the letter “R” inscribed on it, and the left pedal has the letter “L”
inscribed on it.
• A 5 mm hex wrench can also be used to adjust brakes.
• The tire inner tube size is 20”x4.5/5” for the rear and front with Schrader valve.
DANGER!
Please read all assembly instructions in full before beginning the build of your new
bike.
TIP
VIDEO
View our assembly video to follow step-by-step instructions on our website at
eusupport.super73.com
GETTING STARTED
!
!
If any damage has occurred to your SUPER73 during transit, please submit photos to
SUPER73 by emailing us at customercare-eu@super73.com .
Before performing any work on your Super73, turn off the power system and remove
the battery. Be sure to also turn off the power system and remove the battery during
transport in a vehicle. Involuntary activation of the pedal assistance system presents
a risk of injury, death and/or property damage.
To Next Page
Loading...
