26
!
For optimum braking performance, SUPER73 e-bikes are equipped with Tektro disc
brakes. Tektro brake adjustment manuals are available on www.tektro.com.
The SUPER73 brake orientation is as follows:
Rear brake = right lever
Front brake = left lever
Brake Models: Tektro Hydraulic brakes HD- E350,
https://tektro.com/en/product/5
Brake Pads: Tektro A10.11
Resin Pad, 2 Piston
On a hydraulic disc brake, pad wear is compensated automatically. Simply check the
alignment of the pads with the disc and check that the wheel is aligned too. Good
alignment ensures the absence of noise and normal wear of the pads.
To ensure maximum service life of the brake components, avoid contamination of the
pads and the disc by greasy substances.
Regularly check the condition of your cables, ducts, or harness and the wear of your
pads.
Some rotors are only compatible with “resin” pads. Do not use a metal pad with
rotors marked “resin”.
For better ergonomics and safety, we advise you to adjust the brake levers in a
position that feels natural. If you have any questions or concerns, please contact
SUPER73.
Brakes are an integral part of the operation of your e-bike and must be properly
maintained, adjusted, and replaced when necessary. If any of these tasks are not
within your skill set, we recommend taking your SUPER73 to an e-bike specialist or
professional cycle mechanic.
BRAKES
The hydraulic brake system requires proper maintenance to be performed on the
pads, rotors, and also on the hydraulic brake line. Always verify that your brakes are
in good condition in order to maintain safe riding.
!
HELMETS / REFLECTORS
A properly fitting ANSI or SNELL, (or CE if you are located in Europe), approved bicycle
safety helmet should be worn at all times when riding your bicycle, or recommended
per your local laws. Always wear a properly fitted helmet that covers the forehead
when riding a bicycle. Further, local requirements may require specific safety devices.
It is your responsibility to familiarize yourself with the laws of the country/state where
you ride and to comply with all applicable laws, including properly equipping yourself
and your bike as the law requires.
Reflectors are important safety devices that are designed as an integral part of your
bicycle. Certain regulations require every bicycle to be equipped with front, rear,
wheel, and pedal reflectors. These reflectors are designed to pick up and reflect
street-lights and car lights in a way that helps you to be seen and recognized as a
moving bicyclist. Check reflectors and their mounting brackets regularly to make sure
they are clean, straight, unbroken, and securely mounted.
To Next Page
Loading...
