You are now able to start your vehicle normally
. You
may now attempt to program your vehicle again. In the
event that recovery is unsuccessful or fails to complete the
programming cycle, a status message will display on the
programmer.
NOTICE: It is NOT recommended to store your programmer in your
vehicle in extreme heat, direct sunlight or extreme cold (temperatures
near or below freezing). These conditions can cause malfunction or
damage to the programmer.
TIP: When you are not using your device,
place it in its protective bag. This will keep the
display from getting scratched.
TIP: Prior to using your device after a long period of non-use, use Ignition to update. This will ensure
that your device is up-to-date and contains all of the latest les and functionality.
Ignition
32
TROUBLE SHOOTING CONT’D
STORAGE AND MAINTENANCE
To Next Page
Loading...
