SuperLightingLED K-1000C - User Manual

Version V1.3
K-1000C Operation manual
一、K-1000C system features
1、32 to 65536 grade gray control, software Gamma correction processing.
2
、
Supports various point, line and area light sources, supports various rules, and special-shaped processing.
3、The single port output of the controller can reach a maximum of 512/2048 pixels (the maximum 512 pixels of
the DMX luminaire is exemplified by three channels).
4
、
The playback content is stored in the SD card, which can store up to 32 effect files. The SD card capacity
supports 128MB-32GB.
5
、
The controller can be used in a single unit or in multiple cascades. The cascade uses photoelectric isolation:
anti-interference and better stability. The cascade distance between the two units can reach 150 meters, and
0.5 square meters of pure copper power cord is needed.
6、The controller with the loaded chip can lock the loaded IC in the software or not. By adjusting the controller's
chip button to select the loaded IC, this scheme is more flexible and convenient.
7、The IC controller for DMX luminaires comes with a write address function; in addition, with our 2016 LedEdit-K
V3.26 or higher software, one-click address function can be set.
8
、
Supports on-board luminaires with 4 channel (RGBW) pixels or split into single channel point pixels.
9
、
Enhanced TTL and 485 differential (DMX) signal output.
10
、
The controller comes with 22 test effects and comes with DMX512 test function.
Remarks: 1. The controller carries 512 pixels of light, the speed can reach 30 frames/second, the speed of 1024
pixels can reach 25 frames/second, and the speed of 2048 pixels is about 15 frames/second (the
above parameters are based on the 1903 protocol IC DATE, there will be differences between
different IC).
2. The international standard DMX512 (1990 protocol) has a maximum load of 512 pixels. When the
load is 170 pixels of the international standard, the speed can reach 30 frames/second, the speed of
340 points is about 20 frames/second, and the speed of 512 pixels is about 12 frames/second.
3. For the function of Beidou wireless synchronization, please contact sales staff or technical support
for details.

Summary

K-1000 C System Features

32 to 65536 Grade Gray Control

Offers 32 to 65536 grade gray control with software Gamma correction processing.

Support for Various Light Sources

Supports various point, line, and area light sources with custom rules and special-shaped processing.

Single Port Output Capability

Single port output supports up to 512/2048 pixels, with DMX luminaires exemplified at three channels.

SD Card Playback Storage

Stores up to 32 effect files on SD card (128MB-32GB capacity), supporting playback.

Single Unit or Cascaded Use

Can be used individually or cascaded with photoelectric isolation for anti-interference and stability.

Flexible IC Loading

Controller allows locking or not locking loaded ICs in software, with flexible chip button selection.

DMX Address Functionality

DMX luminaires feature write address function; one-click address setting available with LedEdit-K V3.26+.

Pixel Type Support

Supports RGBW 4-channel pixels or split single-channel point pixels on-board.

Signal Output Options

Features enhanced TTL and 485 differential (DMX) signal output.

Built-in Test Functions

Includes 22 built-in test effects and a DMX512 test function.

Supported IC Chips

Chip Compatibility List

Comprehensive list of compatible IC chips (e.g., UCS19**, SM167**, WS28**) and their maximum pixel support.

DMX Chip Specifications

Details DMX chip variants (e.g., DMX 250kbps, DMX 500K) and their pixel/speed recommendations.

Silk Screen Definitions

Button Functionality

Explains the function of CHIP, MODE, SPEED+, and SPEED- buttons for operation and mode switching.

Port Connections and Signals

Defines the purpose of DC 5-24V, GND, POWER, ERROR, SD card, DAT, CLK, IN A/B, OUT A/B ports.

Conventional IC Lamp Wiring

DAT;CLK;GND Wiring

Details the standard wiring connections using DAT, CLK, and GND for IC lamps.

DMX512 Luminaire Wiring Methods

Differential Signal Wiring

Diagram for DMX512 differential signal line wiring: A/B/ADD/GND (A/B/GND).

DMX512 Luminaire Wiring Details

Single Line Signal Wiring

Diagram for DMX512 single line signal wiring: A(DAT)/ADD/GND.

DMX512 Lamp Address Setup and Test

Manual Address Writing Procedure

Procedure for selecting DMX512 IC model, fixture interval channel, and writing code via buttons.

One-Button Address Writing

Guide to using the software for one-click address writing, including interval channel and chip selection.

Luminaire Test Modes

Describes entering automatic (A) and manual (C) test modes, with display codes for channel count.

Specific Parameters

Physical and Memory Card Specs

Lists working temperature, power, weight, size, and SD card type, capacity, and format.

SD Card Formatting

Formatting Procedure

Step-by-step guide for formatting SD cards to FAT or FAT32, including settings for unit size.

Common Problem Handling

FFF Display Error

Troubleshooting guide for FFF display indicating card read errors, empty files, or model mismatches.

No SD Card Playback

Resolving issues where the controller plays built-in effects but not SD card content due to detection problems.

No Lamp Effect Change

Diagnosing why lamps show no effect despite normal controller indicator lights, checking signal lines.

Strobe Flash & Effect Changes

Troubleshooting abnormal strobe flashes or effect changes by checking ground wires, chip selection, or power.

SD Card Formatting Failure

Steps to resolve SD card formatting issues, including checking protection locks and trying different card readers.

SuperLightingLED K-1000C Specifications

General

Brand	SuperLightingLED
Model	K-1000C
Category	Lighting Equipment
Language	English